Free Arm Sewing - Silvercrest SON 90 A1 Instrucciones De Uso

Free arm sewing

To work tubular-shaped fabrics, such as sleeves or trouser legs, you can
remove the free arm cover.
• If appropriate, remove the waste container from the machine.
• Slide the free arm cover to the left and pull it off (Fig. 46)..
• You can now pull the textiles over the free arm w and work them
(Fig. 47).
• To replace the free arm cover, push it onto the free arm w until it clicks
into place and is firmly seated (Fig. 48).
- 126 -
Fig. 46
Fig. 47
Fig. 48