Technical Data; Safety; Intended Use - Zipper Maschinen ZI-BTS350 Manual De Instrucciones

11.2

Technical Data

Motor / Drive
Displacement
power
Fuel / oil ratio
Fuel tank
Ø Cutting disc
Ø bore Cutting disc
Max. depth of cut
Max. speed whell
Starter
Sound power level L
Weight
Dimensions (LxWxH)
12

SAFETY

12.1

Intended Use

The ZIPPER ZI-BTS350 is approved for the following stated activities in compliance with the safety
instructions described in this operating and maintenance instructions:
Asphalt and concrete cutting in compliance with all technical limits and all safety regulations.
The improper use or failure to comply with the provisions and instructions detailed in this manual will
void all claims for damages against the ZIPPER GmbH result.
Unauthorized modifications and manipulations of the machine also immediately invalidate all warranty
and damage claims.
12.2 Safety
Warning signs and / or labels on the machine that are illegible or have been removed are to be replaced
immediately!
The most important factor for adequate security at work is common sense. Care and good judgment are
the best protection against injury. This list of general safety information does not purport to include all
possible sources of danger, but we have tried to highlight some of the important details. Individuals
should look for caution, warning and danger signs that are marked on the device and displayed at work
and read the safety, understand and heed.
ZIPPER MASCHINEN GmbH
ZI-BTS350
WA
www.Zipper-Maschinen.at
Spec. 2-stroke, 1-cylinder, air-cooled
cm³
kW
Liter
mm
mm
mm
U/min
Spec.
dB(A)
kg
mm
ZI–BTS350
65
3
40:1
1,5
300-350
20 / 25,4
92 / 115
4850
cable
114
13
750x420x320
SAFETY
27