Specific Risks And Hazards When Working With Concrete Cutter - Zipper Maschinen ZI-BTS350 Manual De Instrucciones

SAFETY
12.3

Specific risks and hazards when working with concrete cutter

Concrete cutters are heavy units and should be positioned by two people with appropriate force, the
machine-mounted lifting handles are to be used, furthermore, make sure that a proper lifting
techniques.
Bruises
Minimize the risk of crushing her foot by wearing work boots with steel toes.
Make sure that the machine and the operator on level ground are both stable when setting up and the
machine will not tip over during operation, slipping or falling.
Injury by diamond saw blade
Contact with the rotating diamond saw blade will result in serious injury.
The machine is to maneuver with the mounting brackets, with secure stand BEHIND the machine.
Within 15m No 2 Person.
Flying asphalt concrete fagments
NEVER remove splash guard lip. Damaged immediately renew. Use break-resistant certified goggles.
Hazards of the work environment
Make sure that the walls of a trench are stable and not collapse because of the vibration.
Make sure that the area to stomping does not "live" electrical wires, gas pipes, or water pipes, which
can be damaged by vibration.
Be careful when working near unprotected wells or pits. The operation of the machine is its own
discretion and at your own risk.
Risk of burns
Touching the carburetor, the engine, the spark plug and other heatable machine components can cause
serious burns, after prolonged continuous operation.
Fire and Explosion Hazards
Fuel is highly flammable and explosive under certain conditions.
NEVER use fuel or engine oil while the machine is in operation or still hot.
Refueled places where fuel is stored, not smoke or allow open flames or sparks.
Do not overfill the fuel tank and avoid the spillage of gasoline during refueling. If any fuel is spilled,
make sure that this area is dry / cleaned before starting the engine.
Refuel only with the filter.
Make sure that the fuel tank cap is tightly closed after refueling again safely.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 29
ZI-BTS350