Basic Hookup Methods - Sanyo AVM-1309S Manual Del Propietário

QuickTips
The TV will automat-
ically select the
correct Antenna
mode for the type of
signal you connect.
TV will switch off
automatically after
15 minutes if there is
no signal reception
(cable out or station
not broadcasting).
CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by local
government authorities. To
receive cable programs, even
with equipment which is
capable of receiving cable
channels, the consumer must
subscribe to the cable
company's service.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or
indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your
cable or antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR, and TV
CABLE BOX
IN
c Outdoor or Indoor Antenna with VCR and TV
+
+
d Satellite Dish with Receiver, VCR, and TV
CH3
CH4
75 OHM Terminal
Use the 75 ohm terminal
to connect a VCR, cable,
cable box, outdoor/indoor
antenna or satellite
receiver directly to the
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
CATV IN
VIDEO R- AUDIO -L
OUT TO TV S-VIDEO
VIDEO R- AUDIO -L
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
VCR
RECEIVER
IN
FROM ANT.
OUT
IN FROM
SAT.
OUT TO TV.
+