Basic Hookup Methods - Sanyo AVM-2751S Manual Del Propietário

QuickTips
The TV will automat-
ically select the
correct Antenna
mode for the type of
signal you connect.
TV will switch off
automatically after
15 minutes if there is
no signal reception
(cable out or station
not broadcasting).
Exception—When the
Video mode is selected,
the TV will not auto-
matically switch off
when signal reception
has stopped for 15
minutes.
CATV FRANCHISE NOTE:
Cable companies, like public
utilities, are franchised by local
government authorities. To
receive cable programs, even
with equipment which is
capable of receiving cable
channels, the consumer must
subscribe to the cable
company's service.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or
indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your
cable or antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR and TV
CABLE BOX
IN OUT
c Outdoor or Indoor Antenna with VCR and TV
+ +
d Satellite Dish with Receiver, VCR and TV
CATV IN
CH3
CH4
OUT TO TV
See page 9, Using the
Audio/Video jacks.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
RECEIVER
VIDEO R- AUDIO -L IN FROM
S-VIDEO
SAT.
VIDEO R- AUDIO -L
UHF/VHF/CATV
75Ω
AUDIO AUDIO VIDEO INPUT
OUTPUT
AV2
VIDEO
(MON0)
L L
AUDIO
R R
TV BACK
TV BACK
UHF/VHF/CATV
75Ω
AUDIO AUDIO VIDEO INPUT
OUTPUT
AV2
VIDEO
(MON0)
L L
AUDIO
R R
TV BACK
UHF/VHF/CATV
75Ω
AUDIO AUDIO VIDEO INPUT
OUTPUT AV2
VIDEO
(MON0)
L L
AUDIO
R R
TV BACK
UHF/VHF/CATV
75Ω
AUDIO AUDIO VIDEO INPUT
OUTPUT
AV2
VIDEO
(MON0)
L L
AUDIO
R R
VCR
IN
FROM ANT.
OUT
OUT TO TV.
75 OHM Terminal
Use the 75 ohm terminal
to connect a VCR, cable,
cable box, outdoor/
indoor antenna or satellite
receiver directly to the TV.