Reversing The Door; Information On Electrical Connection - Dometic MACAVE S16FG Instrucciones De Uso

MaCave
7.3

Reversing the door

You can also change the hinge of the door, so that it opens to the left rather than the
right.
S16FG
➤ Change the door as described in fig. 4, page 3 to fig. b, page 4.
➤ Turn the door by 180°.
➤ Fit the door handle on the other side as described in fig. d, page 4 to fig. e,
page 4.
S117FG
➤ Change the door as described in fig. 6, page 3 to fig. c, page 4.
➤ Fit the door handle on the other side as described in fig. d, page 4 to fig. e,
page 4.
7.4

Information on electrical connection

A
NOTICE!
Leave the appliance to stand upright for about 2 hours after transporting,
before you connect it to the power supply.
Otherwise this could cause faults in the cooling system.
Observe the following when connecting the appliance:
• Connect the appliance to a circuit that is protected with 15 A.
• Check that the voltage specification on the type plate is the same as that of the
power supply.
• If you use an extension cable, this must be approved for the same values as the
appliance, see chapter "Technical data" on page 29.
• Do not use an extension cable or a multiple power socket that can be switched
off with just one switch.
• The cable must rest securely behind the appliance and not be allowed to lie or
hang unprotected.
EN
Setting up and connecting the appliance
17