Installation; Selecting The Installation Location - Dometic D Serie Instrucciones De Montaje Y De Uso

D154F
Control elements
Pos. in
fig. 3,
Symbol Description
page 4
1
2
3
4
5
6
7
8
6

Installation

6.1

Selecting the installation location

Observe the following, when selecting the installation location:
• The ground must be level and sufficiently stable to support the wine cooler at full
capacity.
• The wine cooler must be positioned so that the plug is accessible.
• Note the information on the electrical connection, see chapter "Connecting the
wine cooler" on page 18.
➤ Remove all the inner and outer packaging material before setting up.
6.2 Integrating the wine cooler
The wine cooler can be set up as freestanding or built-in version (fig. 4, page 5).
Observe the following, when integrating the wine cooler:
• Observe the installation dimensions (fig. 5, page 5).
• Ensure the door will open and close properly in the chosen location.
EN
On/off button
Increases the set temperature by 1 °C or 1 °F for top zone
Decreases the set temperature by 1 °C or 1 °F for top zone
Temperature display (top zone)
Temperature display (bottom zone)
Increases the set temperature by 1 °C or 1 °F for bottom zone
Decreases the set temperature by 1 °C or 1 °F for bottom zone
Switches the interior LED lamp on or off
Installation
17