Mont_1.book Page 6 Monday, March 25, 2002 10:39 AM
346.004
Safety devices
Microswitch: it will stop the machine when
When the lid is closed back, restart the
machine by pressing button I
GB
Microswitch: it will stop the machine when
the pan is removed from its location. After
the pan has been put back in place, restart
the machine by pressing button I
Safety information
•
It is of the greatest importance to carefully
read this manual before carrying out in-
stallation and use operations. Consistent
compliance with the instructions con-
tained in this manual will guarantee per-
sonal and machine safety.
•
Do not tamper with the safety devices for
any reason.
•
We recommend that industrial safety reg-
ulations issued nationally by the appoint-
ed organisms be strictly respected.
•
The manufacturer declines all responsibil-
ity for injures to persons or damages to
property, resulting from failure to comply
with these safety rules.
•
Correct machine setting, lighting and
workshop cleanness are pre-conditions
for personal safety.
•
Do not expose the machine to atmospher-
ic agents.
•
The machine connection and start-up
should only be executed by skilled engi-
neers.
the pan lid is lifted.
ÃÃ%Ã
INFORMATION
Remote control switch: after an
unscheduled power cut, it requests
a specific machine restart control
•
Check that the plant mains ratings corre-
spond to the specifications printed on the
machine data plate.
•
Make sure that the machine is connected
to a grounding system.
•
The work area around the machine should
always be kept clean and dry.
•
Wear the work attire prescribed by the in-
dustrial accident-prevention regulations.
•
This machine should always be used for
its recommended uses; any other use is
deemed improper and therefore danger-
ous.
•
Check the suitability and weight of the
products to knead; do not overload the
machine to exceed its capacity.
•
It is forbidden to introduce any objects,
tools or hands in the working parts.
•
Keep the machine out of children's reach.
•
Unplug the machine from the mains when
not in use.
GENERAL
1
IDM-34600400301.tif