dirna Bergstrom bycool green line SLIM COOL TRP Manual Del Usuario página 12

SLIM COOL
EN ES
How to deactivate remote control:
In order to deactivate remote control, push key
play. Once it stops flashing, push key
or else you will have to repeat the whole operation.
Equipment switching on
In order to switch on Slim Cool, push the On/off key
F4
(Automatic Function). To change function, push the On/off key
functions will be displayed one by one. Release key when desired function is reached. The
first time equipment is switched on, it will be initiated with the pre-established parameters.
Function F4 - Automatic unit operation
F4
Selecting allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF to 71ºF),
which will be selected from the control panel
keys. When selecting, the display will switch between
this function the unit automatically regulates and controls comfort temperature by acting on
the compressors and the blower speeds. Pressing the remote control
F4
and moves to
parameters.
Function F0 - Manual operation
F0
To select the display shows the set temperature and allows the user to choose the
comfort temperature which will be displayed from 15ºC to 27ºC (59ºF to 71ºF) and to
vary the unit blower speed (5 speeds indicated with the characters
Comfort temperature can be controlled by briefly pressing the keys
panel or
The blower speeds are controlled by keeping the keys
down or from the remote control, with the display showing
display shows the degrees selected when the unit is running.
F0
(Manual Function). The unit runs initially in
remote control.
-
of control panel until
+
on panel. You will have to do it within 30 seconds
. Equipment always starts on function
-
+
keys or the remote control
CA
+
12
C
, flashes on dis-
and the various
and the degrees selected. With
key cancels function
F4
with the default
V1 V5
to ).
-
+
. of the control
-
of the control panel pressed
V1 V2 V3 V4
, , ,
®
V5
, . The