Introduction..................................................................... 2
Safety..............................................................................3
Assembly........................................................................ 5
Operation........................................................................ 7
Product description
We have a policy of continuous product development
and therefore reserve the right to modify the design and
appearance of the products without prior notice.
Intended use
WARNING: This attachment may only be
used together with the intended product, see
Attachment overview
11
10
12
1. Bevel gear
2. Chain lubrication adjustment screw
3. Shaft (1100 mm)
4. Harness support hook (24 mm)
5. Protective guard for saw chain
6. Bar nut
7. Chain tensioning screw
8. Saw chain
9. Guide bar
10. Chain oil tank
11. Filling with chain oil
2
Contents
Introduction
2
8
7
15
Maintenance................................................................... 8
Technical data.............................................................. 14
Accessories.................................................................. 14
the accessory chapter in the Operator's
Manual of the product.
This attachment is only designed for cutting branches
and twigs.
11
9
2
1
3
6
5
13
16
12. Operator's manual
13. Transport guard
14. Combination wrench
15. Harness
16. Torx wrench
17. Hand guard
18. Harness support hook (1")
18
4
17
14
443 - 004 - 24.08.2018