Leckey MyWay Manual De Uso página 74

p.74 MyWay Manual de Uso
10.5 Ankle Guides
• To attach the ankle guides,
feed the cord loop over the
front castor, hooking it into
the crevice between the
castor and the frame tube.
• At the opposite end of the
ankle guide cord, remove
the knob from the screw,
feed the screw through
the hole in the frame tube
and reattach the knob,
tightening to the
desired level.
• The ankle guide pad labels
indicate whether they are
for use on the left or right
hand side of the user-
attach the correct pad
to the ankle guide using
the buckle. The distance
between the pad and
the frame tube can be
lengthened/shortened by
adjusting the black strap.
• Undo the Velcro tabs on the
the user. The two-piece
tab should be secured over
the top of the one-piece
tab.
• There are sliders on the
ankle guides which can be
used to limit the amount
of movement the user can
make along the guide cord.