Low Battery - KPS -PA70 Manual De Funcionamiento

KPS-PA70 • Digital clamp meter
AC
DC
AUTO
MAX
MIN
REL
%
,VmV
A
,mF,μFnF
kΩ,MΩ,Ω
Hz,kHz,MHz
NCV
3. SPECIFICATIONS
The meter should be recalibrated under the condition of 18°C~28°C, relative
humidity less than 75% with the period of one year.
3.1 General
• Automatic measuring range and manual measuring range.
• Full measuring range overload protection.
Alternating current
Direct current
Diode
Continuity
Maximum measurement state
Minimum measurement state
Relative measurement mode
Automatic power-off state
LOW BATTERY
Reading hold state
Percentage (duty ratio)
Millivolt, Volt (voltage)
Amperes (Current)
Nano farad, Microfarad, Millifarad
Ohm, Kilohm, Megohm (resistance)
Ohmios, Kiloohmios, Megaohmios (resistencia)
Hertz, Kilohertz, Megahertz (frequency)
Non-contact voltage detection
31