Scale Removal - Honeywell QuietCare HCM-630 Serie Manual Del Usuario

Ocultar thumbs Ver también para QuietCare HCM-630 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

QuietCare_OM_Rev2.qxd
Cleaning
Your Protec
Cleaning Cartridge helps reduce mineral build-up in your humidifier and will help extend the
life of your filter. However, you should still continue to clean your humidifier regularly as needed.
Cleaning involves two steps, SCALE REMOVAL and DISINFECTING. Be sure to perform these in the
proper order to avoid harmful chemical interactions.
• First, turn off and unplug the humidifier.
• Remove the Water Tank and Motor Housing.
• Remove the filter from the Base.
• Empty any water from the Base.
NOTE: REMOVE FILTER AND PROTEC
Failure to remove filter during cleaning will destroy the filter.
STEP ONE:

SCALE REMOVAL

BASE
1. Fill the Base with:
• 1 cup (8 ozs.) of undiluted white vinegar
2. Let solution stand for 20 minutes.
3. With the vinegar in the Base, clean all interior
surfaces with a soft cloth or brush to help
remove scales.
4. Rinse the Base thoroughly with water to
remove scale and cleaning solution.
NOTES:
• The use of other water treatment products and chemicals may cause deterioration of the filter or
damage the humidifier, thereby hindering the humidifier's effectiveness.
• If you are experiencing more buildup than when you first purchased your humidifier, you may need to
replace your Protec
Cleaning Cartridge. Changing your cartridge every 30 days will provide continuous
protection.
5/16/06
5:47 PM
Page 9
CLEANING CARTRIDGE BEFORE CLEANING.
WATER TANK/BASE
1. Fill the Water Tank with:
2. Let solution stand for 20 minutes. Make sure to
3. Rinse with water until the smell of bleach is
STEP TWO:
DISINFECTING
• 1 teaspoon of household bleach
and
• 1 gallon of water
Pour some of this solution into the Base.
cover all surfaces.
gone.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido