Overview Of The Components - Clatronic DBC 3388 Instrucciones De Servicio

WARNING:
• Before filling the water tank (13) remove the mains lead. Please do
not fill the water tank higher than the MAX mark (approx. 220 ml).
• Do not try to repair the appliance on your own. Always contact an
authorized technician. To avoid the exposure to danger, always
have a faulty cable be replaced only by the manufacturer, by our
customer service or by a qualified person and with a cable of the
same type.
• While switched on or being allowed to cool down, the iron and its
mains lead must be out of the reach of children who are younger
than 8 years old.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe
way and under-stand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children
without supervision.
• This device should only be used for ironing garments and textiles!
• Please use only distilled water.

Overview of the Components

1 Spray nozzle
2 Filler opening for the water tank
3 Steam volume regulator
4 Spray button
5 Steam jet button
6 Flexible line cord entry
7 Function switch
8 Stand
9 Contact plate mains connection
10 Control lamp
11 Temperature setting mark
12 Continuously adjustable temperature regulator
36
13 Transparent water container
14 MAX mark for water level
15 Ceramic sole plate
Instructions
Unpacking
1. Remove any protective foils and stickers from the soleplate.
2. Please unwind the lead completely.
Set up / assemble the stand (8)
Use the supplied stand for resting the iron securely on it.
A screw clamp is integrated onto the underside of the stand.
Use this to secure the stand to your ironing board or to a table.