3. BEFORE USE
1.
Take the product out of the box.
2.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
4. OPERATION
PRODUCT ASSEMBLY
Note: The product includes 2 screws to assemble the wall bracket.
1.
Install the battery in the vacuum cleaner's main body by aligning it with the guides on the
main body and sliding it down.
main body and sliding it down.
main body and sliding it down.
2.
Introduce the vacuuming tube in the main body until a click is heard, indicating it is
Introduce the vacuuming tube in the main body until a click is heard, indicating it is
Introduce the vacuuming tube in the main body until a click is heard, indicating it is
properly fixed.
3.
Attach the suction base with the brush to the other end of the vacuuming tube.
ENGLISH
CONGA ROCKSTAR VITAL
17