The Ideal Location; Remote Control/Battery Replacement - Unold 86436 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55

THE IDEAL LOCATION

1.
Maintain an adequate safety distance (at least 1 meter) to other objects, such
as furniture, curtains, etc.
2.
Only place the appliance in operation in a vertical position.
3.
Ensure that air can flow in and out unhindered - do not, under any circum-
stances, cover the air inlets of the appliance.
4.
Only place the appliance on a solid and level substrate. Do not place the
appliance on soft surfaces (sofa, bed) because the appliance can tip over.
5.
In addition, ensure that the appliance is not set up on deep-pile carpets or in
dusty environments.
6.
For safety reasons, the appliance must not be used in the vicinity of sinks,
bathtubs, or water connections.
7.
Never place the appliance directly under an electrical outlet, and ensure that
the power socket used is easily accessible at all times.
8.
Check whether the power cord is routed in such a manner that no one can
stumble over it.
9.
The power cord should not touch any housing parts, this could cause the
cable to melt.
Be aware that the appliance can become very hot - fire hazard! Particularly
ensure that children are kept away from the appliance.

REMOTE CONTROL/BATTERY REPLACEMENT

1.
Carefully pull the cover of the battery compartment off of the remote control
unit.
2.
Insert the battery, in this process, strictly ensure that the polarity is correct;
for orientation there are appropriate marks in the battery compartment.
3.
If you want to insert a battery, ensure that you use type AAA batteries.
4.
Close the cover.
5.
If you adjust the appliance with the remote control unit, ensure that you
hold it in the direction of the fan heater while you are making the settings.
6.
The designations of the buttons on the remote control unit are identical to
those of the buttons on the appliance. Please comply with the instructions
in this regard in the chapter, "Preparing the appliance for operation".
23

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Senza

Tabla de contenido