Safety; Important Safety Instructions For Using Tools - Hitachi NT50AF Manual De Instrucciones Y Seguridad

English
IMPORTANT SAFETY INSTRUCTIONS
FOR USING TOOLS
READ ALL INSTRUCTIONS
1. OPERATORS AND OTHERS IN WORK AREA MUST WEAR
SAFETY GLASSES WITH SIDE SHIELDS.
from the front and side.
The employer must enforce the use of safety glasses by the
Tool operator and others in work area.
2. NEVER USE OXYGEN OR OTHER BOTTLED GASES.
EXPLOSION MAY OCCUR.
3. NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA.
Respect the Tool as a working implement.

SAFETY

DANGER
When operating the Tool, always wear eye
safety glasses with side shields, and make
sure others in the work area wear safety
glasses, too.
Safety glasses must conform to the re‑
quirements of American National Stan‑
dards Institute, ANSI Z87.1 and provide
protection against flying particles both
Never use oxygen, combustible gases or
any other bottled gases as a power source
for the Tool.
Use of the above gases is dangerous, as
the Tool will explode.
Use only clean, dry, regulated compressed
air.
WARNING
Always assume the Tool contains
fasteners.
Never point the Tool at yourself, toward
yourself or others whether it contains
fasteners or not.
If fasteners are mistakenly driven, it can
lead to severe injuries.
Never engage in horseplay with the Tool.
— 4 —