Important Safety Information; Modelo Nt50Yf - Lista De Piezas; Definitions Of Signal Words - Hitachi NT50YF Manual De Instrucciones

Español
Modelo NT50YF -
Lista de piezas
No. de No. de
Descripción
artículo pieza
1 330276 Cuerpo – derecho
2 330277 Cuerpo – izquierdo
3 330278 Mango de extensión (incluye #35)
4 ——- Suela para clavado en lengüeta (Vea la Ref. #36)
5 330280 Base de la suela para clavado en lengüeta – (2 cada una)
6 330281 Tornillos de la base de la suela para clavado en lengüeta (4 cada una)
7 330285 Tornillos de la suela (4 cada una)
8 330286 Pasadores para la placa de desgaste / placa de corte (2 cada una)
9 330287 Placa de desgaste
10 330288 Placa de corte
11 330289 Pasador rodante del resorte del propulsor, 1/8 x 5/8
12 —— Tubo del resorte del propulsor (Vea la Ref. #39)
13 330290 Resorte del propulsor
14 330291 Conector
15 330292 Pasador del resorte del riel, 1/8 x 3/8
16 330293 Riel
17 330294 Propulsor
18 330295 Casquillo de caucho del martinete
19 330296 Martinete (incluye #18, 21, 23)
20 330297 Cuchilla propulsora
21 330298 Arandela del martinete
22 330299 Guía del resorte del martinete
23 330300 Resorte del martinete
24 330301 Guía del martinete
25 330302 Tornillos de tope del martinete (2 cada uno)
26 330303 Tornillo de reborde (incluye #27)
27 ——- Tuerca del tornillo de reborde (Vea la Ref. #26)
28 330305 Juego de la estructura del trinquete
— 58 —
English

IMPORTANT SAFETY INFORMATION

Read and understand tool labels and all of
the operating instructions, safety precau-
tions and warnings in this manual before
operating or maintaining this nailer. Failure
to follow warnings could result in DEATH or
SERIOUS INJURY.
Most accidents that result from the operation and maintenance of
Nailers are caused by the failure to observe basic safety rules and
precautions. An accident can often be avoided by recognizing a
potentially hazardous situation before it occurs, and by observing
appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of
this Manual and in the sections which contain the operation and
maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine
damage are identified by DANGERS and WARNINGS on the Nailer
and in this Manual.
Never use this Nailer for applications other than those specified in
this Manual.

DEFINITIONS OF SIGNAL WORDS

DANGER indicates an imminently hazardous situation, which
if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation, which if
not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation, which if
not avoided, may result in minor or moderate injury,
or may cause machine damage.
NOTE emphasizes essential information.
— 3 —