Safety Information - ENAR TEN2540 Manual De Instrucciones

2

SAFETY INFORMATION

2.1 SAFETY DURING THE OPERATION OF THE MACHINE
!
•
•
•
•
•
en
•
•
•
•
•
•
4 TEN2540-TEN2550-TEN3040-TEN3050
Improper use or maintenance of the equipment may lead to hazardous situations. Read and
digest the instructions in this section before starting work with this machine. Machine operators
should ensure that they know how to work the equipment safely. All queries should be dealt
with by personnel familiar with the machine or else by contacting ENARCO directly.
The motor gets very hot during operation: leave it to cool down before touching it.
Never leave the machine unattended during operation.
The equipment should not be used without adequate protection of the belt cover. Always make
sure this is not missing and that it is in good condition.
Operators should use protective clothing and ear muffs.
Close off entry to the worksite for all unauthorised personnel.
Make sure you know how to disconnect the machine before starting up the motor in case you
get into difficulties.
Make sure the machine has stopped before any attempt is made to move it.
Do not attempt to lift the equipment unaided. Ask for help or use a lifting machine, taking hold
of the equipment by the lifting handle incorporated in the assemblysurrounding the compaction
plate.
Do not use the equipment if you are not in good physical shape.
Store the equipment properly in a clean, dry place whenever it is not going to be used. Fuels
and other consumables should be kept in marked containers in accordance with the
manufacturer's instructions. All current legislation concerning the storage site should also be
complied with.
Modifications and adaptations: for safety purposes, it is absolutely forbidden to modify or adapt
the equipment in any way, including alterations to the number of revolutions of the motor
esstablished by the manufacturer, without prior authorisation from ENARCO. ENARCO will be
exempt from any liability deriving from failure to comply with this instruction.
REVERSIBLE PLATE COMPACTORS