Maintenance; Maintenance Schedule - ENAR TEN2540 Manual De Instrucciones

7

MAINTENANCE

7.1

MAINTENANCE SCHEDULE

Intervals
Once a day
or every 8
hours
After first 20
hours
en
Once a week
or every 50
hours
Monthly or
every 250
hours
Once every
six months
or every 500
hours
Once a year
or every
1000 hours
16 TEN2540-TEN2550-TEN3040-TEN3050
Maintenance
area
- Check oil level
Motor
- Inspect air filter
-
Hatz motor
- Check for damage, leaks, or similar problems
Machine
- Clean underside of vibrating plate.
- Change engine oil
- Check threaded connections
Motor
- Clean air filter
- Check and adjust valve clearance
Hatz motor
- Inspect and adjust V-belt
Machine
- Check threaded connections
Motor
- Cleaning cooling system
- Inspect rubber buffers
- Check oil level for vibrator
Machine
- Inspect and adjust V-belt
- Change engine oil
Motor
- Clean grating on exhaust
Hatz motor
- Check and adjust valve clearance
- Clean sediment bowl
Honda / Robin motor
- Inspect spark plug
- Check and tighten up screws
- Hydraulic control: check level and top up as
Machine
- Change fuel filtration element
Hatz motor
- Check and adjust setting for carburettor
- Inspect and adjust valve clearance
Honda / Robin motor
- Change vibrator oil
- Clean oil filter
Hatz motor
- Clean combustion chamber
- Clean fuel tank and filter
Honda / Robin motor
- Inspect fuel pipe
- Remove dirt and used grease and replace rusty
Machine
Maintenance tasks
Check water separator
necessary.
components
REVERSIBLE PLATE COMPACTORS
Point
7.4
7.3
7.4
7.3
7.10
7.12
7.4
7.7
7.2
7.13
7.8
7.6
7.12
7.9