In Case Of Failure; Intructions For Ordering Parts; Intructions For Requesting Guarantees; Useful Addresses - ENAR TEN2540 Manual De Instrucciones

8

IN CASE OF FAILURE

8.1 INTRUCTIONS FOR ORDERING PARTS

1.
2.
3.
4.

8.2 INTRUCTIONS FOR REQUESTING GUARANTEES

1.
en
2.
3.
4.
5.
9

USEFUL ADDRESSES

ENARCO, S.A.
WEBSITE:
TECHNICAL DEPT:
NOTE: ENARCO, S.A. reserves the right to modify any information in this manual without prior notice
30 TEN2540-TEN2550-TEN3040-TEN3050
In all orders placed for parts, THE CODE NO. GIVEN IN THE LIST OF PARTS SHOULD BE
INCLUDED FOR THE PART CONCERNED. It is advisable to include the MACHINE'S SERIAL
NUMBER.
The specifications plate with the serial numbers and MODEL are on the top of the engine
plate.
Please supply the correct instructions for transport, including the preferred route, address and
complete name of the consignee.
Do not return parts to the factory unless you have been given written permission to do so. All
authorized items should be returned carriage paid.
The guarantee is valid for one year from the date the machine was purchased. The guarantee
covers the parts with manufacturing faults.
In no case will the guarantee cover a fault caused by improper use of the equipment.
In all requests for guarantees, THE MACHINE SHOULD BE SENT TO ENARCO, S.A. OR AN
AUTHORIZED WORKSHOP, always indicating the complete name and address of the
consignee.
The Technical Department (S.A.T.) will notify you immediately if the guarantee has been
accepted and, if requested, can also send out a technical report.
No piece of equipment will be covered by guarantee if it has been manipulated previously by
personnel not connected to ENARCO, S.A.
Address: C/ Burtina, 16
o
50197 ZARAGOZA, SPAIN
Telephone: (34) 976 464 090
o
Fax: (34) 976 471 470
o
http://www.enar.es
sat@enar.es
REVERSIBLE PLATE COMPACTORS