Mode Selection; Tbf-300A; Setting The Number Of Print Outs And Printing Language - Tanita TBF-300A Manual De Instrucciones

8. Mode Selection

Please determine which functions (modes) you would like to activate on your new TBF unit. Your
selection will be recorded automatically. If there is no need to make a change, the machine may
be started by simply pressing the [ON/OFF] key.
Please read the page that corresponds to the model which you have purchased.
a

TBF-300A

a
TBF-300/ TBF-310/ TBF-410 : P.25
18
a
For the TBF-300A:
A. Setting the Number of Print Outs and Printing Language
: P.19
Select the number of print outs (0 ~ 9) and the printing language (English or Spanish).
TBF-300A
A. Setting the Number of Print Outs and Printing Language
B. Setting the Mode
C. Setting the Original Mode
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
1
MALE cm
or
FEMALE ft.in
AGE
ATHLETIC
5
STEP ON % FAT
WEIGHT Kg
CLOTHES lb
MALE cm
FEMALE ft.in
ATHLETIC AGE
STEP ON % FAT
The unit will start up with this setting the next time it is used.
1. Press and hold the [0] key, and press the [ON/OFF] key
once. Release the [0] key after "Prt-1" is displayed on the
screen.
2. Select the desired number of print outs.
Using the number keys, enter the quantity of print outs
desired. As many as nine are possible.
[1] ~ [9] : Quantity of print outs
[0] : No print out
3. Language Selection
If "0" has been selected for the number of print
outs in Step 2 above, it will not be possible to
preset this item.
The LCD will automatically advance to the Language
Selection Screen. The current language selection will be
displayed as a numerical value.
Example: (LNG-1) denotes English as the selected
language.
Select a preferred language by pressing the corresponding
number on the key pad.
[1] : English
[5] : Spanish
4. When input has been completed, the unit will
automatically switch to the measurement screen.
If further change to the functions is desired, please turn off
the unit, and refer to steps 1 to 4 above.
19