Technical Data; Using Extension Cords - Hilti TE 3000-AVR Manual De Instrucciones Original

3.7 Items supplied
Electric breaker, operating instructions, grease.
The transport trolley is available as an accessory.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group
4

Technical data

For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Weight in accordance with EPTA proce-
dure 01
Single impact energy in accordance with
the EPTA procedure
Storage temperature
Ambient temperature for operation
4.1 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
Sound (power) level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Vibration information
Chiseling (a )
h, Cheq
Uncertainty (K)
4.2

Using extension cords

WARNING
A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶ Check the appliance's supply cord at regular intervals and have it replaced by a qualified specialist if
found to be damaged.
18 English
Printed: 05.02.2019 | Doc-Nr: PUB / 5363993 / 000 / 01
TE 3000­AVR
29.9 kg
68 J
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
)
)
WA
)
pA
)
pA
105 dB(A)
3 dB(A)
94 dB(A)
3 dB(A)
7 m/s²
1.5 m/s²
2190683
*2190683*