Application; Description; Technical Data; Installing Or Replacing Battery - SKF LAGM 1000E Instrucciones De Uso

1. Application

The SKF Grease Meter LAGM 1000E accurately measures the amount of grease applied to
a bearing or other lubrication point. The grease meter can be connected to grease pumps
that are air driven, electrically driven or hand operated.

2. Description

The grease meter measures the grease quantity that passes through the meter. The grease
quantity dispensed can be displayed as cm
easily calibrated, and the display is equipped with a backlight for use in dark environments.

3. Technical data

Suitable grease consistency
Maximum pressure
Thread connection
Maximum flow
Accuracy
Weight
Battery type
Battery life
Low power indication
Operating conditions

4. Installing or replacing battery

Carefully remove the rubber protective sleeve.
Check polarity when inserting battery. Dispose of
the batteries in accordance with local regulations.
4
, gram, oz or fl oz (US). The grease meter is
3
NLGI 0 - NLGI 3
70 MPa (10 000 psi)
M10 × 1
1 000 cm /min (34 us fl oz/min)
3
± 3% up to 30 MPa (4 300 psi)
± 5% from 30 to 70 MPa (4 300 - 10 000 psi)
0.4 kg (0.88 lb)
1 × AA (1,5 V)
50 hours with backlight
2 000 hours without backlight
10 000 hours without displaying (in stand-by
mode, see 6.5)
LOBAT
-20 °C to +54 °C (-4°F to +130 °F)
IP level 67
1
SKF LAGM 1000E