Getting Started - Horizon Fitness ELITE T7 Guia De Funcionamiento

GETTING STARTED

CONNECT WI-FI
The Wi-Fi connection is set up directly on the console. The first time you turn on your machine, you will be prompted to connect
to Wi-Fi.
1) Choose from the available wireless networks detected and shown on screen. If you do not see your network, press
T9
REFRESH. If it is still not showing up, you can add it manually via the OTHER option. If you do not want to set up Wi-Fi at
this time, press SKIP. NOTE – You can set up or change your Wi-Fi connectivity at any time under the SETTINGS option on
the home screen.
2) Use the keyboard to enter your Wi-Fi network password. Press
3) The network will have a by it to confirm you are connected to the network.
4) Use the Date and Time setup screen to select your time zone and set the current date and time.
SET UP XID ACCOUNT FOR VIA FIT CONNECTIVITY
Creating an xID account will allow you to save and share workout data online at www.ViaFitness.com
Create and save up to four xID accounts directly from the console.
1) On the user setup screen, press the CREATE AN xID button.
2) Enter your phone number or another easy-to-remember 10-14 digit number. This will be your account number. Press
confirm.
3) Create an easy to remember 4-digit passcode. Press
4) Enter your email address. This must be an email address not associated with any other xID account. Press
5) Continue entering the user information, press
6) Confirm your information and select the I ACCEPT THE TERMS AND CONDITIONS box to review the Terms and
Conditions. Press to complete xID setup.
14
HZ14_OG_Elite_T7_T9_Rev1_4.indd 14-15
to confirm.
to confirm.
after each entry.
T9 GETTING STARTED
1) Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making sure that it is secure and will not become detached during
operation. Insert the safety key into the safety keyhole in the console.
A) QUICK START
Simply press GO to begin working out. Time will count up from 0:00.
The speed will default to 0.5 MPH. Incline will default to 0%.
B) SELECT A PROGRAM
1) Press the VIRTUAL ACTIVE or WORKOUTS tiles to select an initial program.
2) Scroll through the options by dragging your finger across the touch screen.
3) Select your Virtual Active course or workout type by scrolling through the options. Press
4) Set workout program information by touching and dragging the number until you reach your desired setting. Press
to confirm.
to 5) Press GO to begin workout.
NOTE: You can adjust the spped and incline levels during your workout.
to confirm. C) FINISHING YOUR WORKOUT
When your workout is complete, the console will save your workout data. You will be asked to rate your workout by
selecting the corresponding star. Your workout information will stay displayed on the console for 30 seconds and then
reset. The information will be saved to your workout calendar.
TO CLEAR CURRENT SELECTION
To clear the current program selection or screen, press and hold
to confirm.
for 3 seconds.
7/16/14 2:45 PM
T9
15