Tabla de contenido
Publicidad
o
Evenly spaced: Enter a number and that many columns (or rows) are created, all the same width.
For example, you could enter 3 columns and 2 rows:
Select Evenly
spaced and then 3
Columns and 2
Rows
o
Fixed width: Enter a specific width for the columns. This is probably the most useful choice since
you should know the dimenions of the material being used. For example, if you have 12" wide vinyl,
then you will probably want the columns to be no wider than ~ 11" or, possibly, 11.5". Also, let's say
your vinyl is in 24" long pieces:
Select Fixed width-
11" wide Columns
and 23" long Rows
o
Custom: Because the tiling line can sometimes fall into undesirable spots resulting in, for example,
slivers or extremely tiny shapes of vinyl, using Custom is another option. With it selected, you can
then use the icons above the preview to add cut lines wherever you like:
Add a horizontal tile line
Select Custom
Add a horizontal line
inside of a tile
Preview shows the
project evenly split into
3 columns and 2 rows
The design is 40" wide
and 36" tall.
After creating three 11"
wide columns, the
remaining 7" in width is
on the right side.
After creating one 23"
row, the remaining 13"
in height is at the
bottom.
Add a vertical line inside of a tile
Add a vertical
tile line
Custom lines are
added.
225
Publicidad
Tabla de contenido
