Cut By Color (Scal Pro Only) - KNK Force SCAL Manual De Usuario

o
Additional details on controlling where shapes are cut are presented in Section 10.07.

10.06.2 Cut by Color (SCAL PRO only)

•
The Cut by Color function offers two capabilities:

Turn on and off colors to be cut without the need of hiding layers on the Layers Panel or pre-selecting
shapes to cut. In fact, you don't even need to ungroup mixed-color groups.

Cut all of the colors at once or have the cutter pause between colors, thus permitting the change out of
materials
•
To access Cut by Color, click on the Cut by Color tab in the Cut Settings window:
Click on this tab
Colors in project
Option to Check All or
Uncheck All colors listed
•
Cut all colors (Single job): In this mode all of the colors marked in this window will be cut at one time.

As an example, here are some shapes laid out on the Cutting Mat. Note how the grid is set to divide
the mat into four quadrants:
Shapes are aligned
with the origin
Portrait
Shapes are aligned
with the origin
Landscape
Select either Cut all colors or
Cut each color separately
231