Tabla de contenido
Publicidad
1.2 LCD DISPLAY INSTRUCTION
No.
Symbols
1
*
2
3
*
4
5
6
7
8
9
10
*
11
12
*
-
13
14
15
16
Table 1.1 LCD display instruction
Up and down swing function
Left and right swing function
It's valid under Save mode and displays during setting process.
Temperature lower limit for Cooling: Limit the minimum temperature
value under Cooling or Dry mode.
Temperature upper limit for Heating: Limit the maximum
temperature value under Heating, Space Heating or 3D Heating
mode.
Auto mode (Under Auto mode, the indoor units will automatically
select their operating mode as per the temperature
change so as to make the ambient comfortable.)
It shows the setting temperature value(In case the wired controller
is controlling a Fresh Air Indoor Unit, then the
temperature zone will display FAP)
Cooling mode
Dry mode
Fan mode
Heating mode
When inquiring or setting project number of indoor unit, it displays
"NO." icon
Floor Heating mode (When Heating and Floor Heating
simultaneously shows up, it indicates 3D Heating is activated.)
Display "SET" icon under parameter setting interface
Space Heating mode
Display "CHECK" icon under parameter view interface
Outdoor unit operates under Save mode/upper limit of system
capacitor less 100%/remote Save status
Sleep status
2
User Manual Wired Controller
Instructions
Publicidad
Tabla de contenido
