User Manual Wired Controller
4.5.2 Clock Setting
Clock display: when the timer setting way is clock timer, timer zone displays
system clock in unit On and Off status. "
this time.
Clock setting: long press TIMER button for 5s to enter clock setting and "
icon is blinking. Pressing "
holding "
" or "
" or "
ENTER/CANCEL button or TIMER button to save the setting and then exit setting.
4.5.3 Clock Timer
Unit On/Off at a certain time can be set through clock timer.
Set Timer:
(1) Press TIMER button to enter timer on setting and the "ON" icon is blinking;
(2) Press "
" or "
" or "
to finish setting;
(3) Before pressing ENTER/CANCEL button, pressing TIMER button can save unit
On time and then switch to unit Off time setting with "OFF" icon blinking;
(4) Press "
" or "
" or "
to finish setting;
Cancel Timer:
Press TIMER button to enter timer setting; press TIMER button again to switch to
the setting of unit ON time or unit Off time; press ENTER/CANCEL button to cancel
timer.
Pressing "
" or "
" or "
or "
or "
" button for 5s increases or decr
" button for 5s increases or decreases timer time by 10min.
Clock Timer setting is as shown in fig. 4.7 or 4.8:
" or "
" or "
"
" button increases or decreases clock time by 1min;
"
" button for 5s increases or decreases clock time by 10min; Press
" butt
" button to adjust unit On time. Press ENTER/CANCEL button
" butt
" button to adjust unit Off time. Press ENTER/CANCEL button
"
" button increases or decreases timer time by 1min; holding "
" icon is bright and the clock can be set at
21
22
"
"