Tabla de contenido
Publicidad
User Manual Wired Controller
4.15 REMOTE SHIELD FUNCTION
Remote Shield Function: Remote monitor or central controller can disable the
relevant functions of wired controller so as to realize the function of remote control.
Remote Shield Function includes all shield and partial shield. When All Shield
function is on, all controls of the wired controller are disabled. When Partial Shield
function is on, those controls that are shielded will be disabled.
When the remote monitor or central controller activates Remote Shield on the
wired controller, "
36
controller, "
4.16 CHILD LOCK FUNCTION
When unit is turned on normally or turned off, pressing "
together for 5 seconds will turn on Child Lock function. "
Pressing "
" and "
All the other buttons will be disabled when Child Lock function is on.
4.17 GATE-CONTROL FUNCTION
When there is Gate-control System, user can insert a card to turn on the unit or pull
off a card to turn off the unit. When the card is re-inserted, the unit will recover the
operation as state in memory. When the card is pulled off (or improperly inserted),
"
" icon will show, neither remote control nor operation of wired controller will be
effective and icon "
Note: This model cannot be connected with gate control system on its own
because it cannot detect gate control signal directly. To realize gate control display and
gate control function, it has to be used with wired controller that includes gate control
signal detecting function (used as master and salve wired controller).
" icon will show. If user wants to control through the wired
" icon will blink to remind that these controls are disabled.
" together again for 5 seconds to turn off this function.
" will be flickering.
29
" and "
" will show on the display.
" button
Publicidad
Tabla de contenido
