4.5 TIMER SETTING
The wired controller is equipped with two kinds of timer: general timer and clock
timer. General timer is factory defaulted setting. Please refer to Section 3.2.3 for the
timer setting way.
4.5.1 General Timer
Unit On/Off after a desired hour can be set through general timer.
Set Timer: when timer is not set, press TIMER button to enter timer setting and
"HOUR" icon is blinking. Press "
button to save the setting and then exit setting.
Cancel Timer: when timer is set, press TIMER button to cancel it.
Timer setting range: 0.5~24h. Pressing "
timer time by 0.5h; holding "
0.5h every 0.3s.
In unit On status, timer Off setting is as shown in fig. 4.3
Press TIMER button to set timer
" or "
" button to adjust timer time. Press TIMER
" or "
" or "
"
" button increases or decreases timer time by
Press "
Press TIMER button to finish timer setting
Fig. 4.3 Timer Off setting in unit On status
20
User Manual Wired Controller
" or "
" button increases or decreases
" or "
" button to adjust timer time
"
"