Low Pressure; How To Use Spray Tips - Troy-Bilt 020241 Manual Del Propietário

Ocultar thumbs Ver también para 020241:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section 4: Operation
How to Use Accessory
Tray
The unit is equipped with an accessory tray with phces to
store your spray gun and nozzle extension.There
is also a
hook at the front of the accessory tray to hold your high
pressure hose.
NOTE:The
extra hole in the tray is for storing a utility
brush.The
extra dip in the tray is for storing a turbo
nozzle.The
brush and turbo nozzle are NOT
included with
your pressure washer.You can buy these items as optional
accessories.
[.
PHacenozzHe extension
through hoHe on accessory tray_
as shown in Figure HH.
2.
Place spray gun through hole on accessory tray on
right side of unit (Figure I I).
NOTE:You
may also use the hooks attached to the base
and handle to store your gun and nozzle extension, as
shown on page 5.
3.
Hang high pressure hose on hook attached to
accessory tray on front of tray, as shown in Figure I I.
How
to
Use
Spray
Tips
The quick-connect
on the nozzle extension
allows you to
switch between four different quick connect spray tips.The
spray tips vary the spray pattern as shown (Figure 12).
[
cAuTlo.
]
Follow
these
instructions
to change spray
tips:
[.
Engage trigger lock on spray gun.
2.
Putt back co[tar on quick-connect
and putt current
spray tip off. Store spray tips in slots on holder
that's
attached
to nozzle extension.
3.
Select desired
spray tip:
For gentle
rinse, select white 40 ° spray tip.
To scour
surface, select yellow
15 ° or red 0 ° spray
tip.
To apply chemical, select
black spray tip.
Low
Pressure
Bhck
Use to apply
chemical
H[gb
Pressure
40 ° White
15 ° Yellow
0 ° Red
4.
Pull back on collar, insert new spray tip and release
collar.Tug on spray tip to make sure it is securely
in
place.
5.
For most effective cleaning, keep spray tip from 8 to
24 inches away from cleaning surface. If you get spray
tip too dose, you may damage
cleaning surface.
6.
DO NOT get closer
than 6 inches when
cleaning tires.
" NEVER exchange
spr D, tips without
locking the trigger
lock
on the trigger:

Publicidad

Tabla de contenido
loading

Tabla de contenido