How To Use Accessory Tray; Low Pressure; High Pressure; How To Use Spray Tips - Troy-Bilt 020208 Manual Del Propietário

Ocultar thumbs Ver también para 020208:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Section 4: Operation

How to Use Accessory Tray

The unit is equipped with an accessory tray with places to
store your nozzle extension and slots to hold the cleaning
solution bottle and the detergent siphoning filter.There are
also two hooks at the ends of the handle to hold your
spray gun and high pressure hose.
NOTE: The extra holes in the tray are for storing a brush
and a turbo wand.The brush and turbo wand are NOT
included with your pressure washer.You can buy these
items as optional accessories.
1.
Place nozzle extension through hole on accessory tray,
as shown in Figure 13.
Figure 13 — Accessory Tray
2.
Hang your chemical solution bottle on "J" hook and
place detergent siphoning filter in last slot on left
(Figure 13).
3.
Place spray gun on hook attached to accessory tray on
right side of unit (Figure 13).
4.
Hang high pressure hose on hook attached to
accessory tray on left side of unit.

How to Use Spray Tips

The quick–connect on the nozzle extension allows you to
switch between four different quick connect spray tips.The
spray tips vary the spray pattern as shown (Figure 14).
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER exchange spray tips without locking the safety latch
on the trigger.
Figure 14 — Spray Tip Spray Patterns

Low Pressure

High Pressure

40° White
Follow these instructions to change spray tips:
1.
Engage safety latch on spray gun.
2.
Pull back collar on quick–connect and pull current
spray tip off. Store spray tips n slots on holder that's
attached to nozzle extension.
3.
Select desired spray tip:
For gentle rinse, select white 40° spray tip.
To scour surface, select yellow 15° or red 0° spray
tip.
To apply chemical, select black spray tip.
4.
Pull back on collar, insert new spray tip and release
collar.Tug on spray tip to make sure it is securely in
place.
5.
For most effective cleaning, keep spray tip from 8 to
24 inches away from cleaning surface. If you get spray
tip too close, you may damage cleaning surface. DO
NOT get closer than 6 inches when cleaning tires.
10
Black
Use to apply
chemical
15° Yellow
0° Red

Publicidad

Tabla de contenido
loading

Tabla de contenido