Technical Data - HSM Pure 120 Instrucciones De Servicio

Destructora de documentos
Ocultar thumbs Ver también para Pure 120:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
english
9 Disposal / Recycling
Electrical and electronic old
devices contain a variety of valu-
able materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.

10 Technical data

Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Weight
Power consumption
with max. number of sheets
Sound pressure level emissions
(Idle running / load)
Intake width
Cutting speed
Power supply
Operating mode**
Operating time**
Idle time**
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or
a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during operation.
The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
** Only US-version: Continuous operation
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2014/35/EU
• EMC directive 2014/30/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
12
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
Strip cut
P-2, T-2, E-2
70 g/m
12 - 14
2
80 g/m
2
10 - 12
4.0 kg
300 W
58-60 dB(A) / 63-64 dB(A)
HSM Pure 120
3.9
225 mm
44 mm/s
215 - 240 V, 50 - 60 Hz
110 - 130 V, 50 - 60 Hz
Brief operation
3 min
30 min
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
366 x 258 x 455
20 l
Cross cut
4 x 25
P-4, T-4, E-3, F-1
6 - 7
5 - 6
4.5 kg
120 W
52-53 dB(A) / 60-63 dB(A)
05/2016

Publicidad

Tabla de contenido
loading

Tabla de contenido