Technical Data - HSM Classic 225.2 Instrucciones De Servicio

https://www.supplychimp.com/

10 Technical data

Cutting type
Shred size (mm)
Sa fe ty ra ting German DIN 66399
Cutting ca pa ci ty* (Sheet), DIN A4
Weight
Noise level (Idle running/ load)
Cutting speed
Lo ading width
Voltage
Power for the maximum number of sheets
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Dimensions W x D x H (mm)
Volume of shredded material bag
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the
design and construction of the supplied version of the machine HSM Classic 225.2 meet the fundamental health and
safety requirements of the following EC directives:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards:
EN 953
EN 13849-1
EN 60204-1
EN 61000-6-1
EN 62061
Frickingen, 2.6.2014
14
5.8
P-2 / O-2
T-2 / E-2
2
70 g/m 40 - 42
80 g/m 2 32 - 33
56 dB(A) / 62 dB(A)
EN 1037
EN ISO 13857
EN 60950-1
EN 61000-6-2
ppa. Hubert Kötzinger - Chief Technical Offi cer (CTO)
Classic 225.2
Strip cut
3.9 3.9 x 40
P-2 / O-2 P-4 / O-3
T-2 / E-2 T-4 / E-3
F-1
31 - 33 25 - 27
25 - 27 20 - 22
44 kg
126 mm/s
300 mm
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
1400 W
Continuous operation
-10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
501 x 472 x 877
EN 1088
EN 55014-1
EN 61000-3-2
EN 61000-6-3
english
Cross cut
1.9 x 15 0.78 x 11
P-5 / T-5 P-6 / F-3
E-4 / F-2
17 - 19 10 - 11
12 - 14 7 - 9
52 kg
56 dB(A) / 70 - 73 dB(A)
135 mm/s
120 l
EN ISO 12100
EN 55014-2
EN 61000-3-3
EN 61000-6-4
1 x 5
P-7 / F-3
7 - 8
6 -7
06/2014