Hudora 65138 Instrucciones De Montaje página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
INSTRuCTIoNS oN ASSEMBLy ANd uSE
EN
CoNGRATuLATIoNS oN PuRCHASING THIS PRoduCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions when
giving the product to a third party. This product must be assembled by an adult.
This product is not designed for industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and
use for the purpose it has been designed for.
TECHNICAL SPECIfICATIoNS
Item:
Fitness trampoline foldable 140 cm Ø
Item number:
65138 // 65408
Maximum carrying capacity: 100 kg
SAfETy WARNINGS
This description will help you to assemble and use the trampoline safely as well as
to store it properly.
• The trampoline must be used only on level, firm ground. If you are exercising in
interior rooms, make sure that you have ample space around you so that you will
not bump into furnishings while exercising. In particular, make sure that you
have sufficient clearance to the ceiling or lamps. Insufficient clearance may re-
sult in dangerous head injuries.
• The trampoline may be used anywhere as long as it is placed on a level surface
and the room is high enough. Make sure that no angular or sharp objects are in
the vicinity of the trampoline.
• It is important to have adequate light when you are using the trampoline so that
you can easily see the middle of the mat. Do not jump on the side covering.
• Your trampoline's base feet are equipped with non-slip rubber feet. Like any
rubber material, the feet may leave marks. It is therefore wise to place a protec-
tive covering on floors susceptible to damage from such marks.
• Make sure that the trampoline is in technically perfect condition. Do not use it if
you notice any defects. See to it that defective parts are repaired immediately.
Do not modify the trampoline technically in any way.
• Warning! This fitness trampoline is not a toy. Children should always be supervi-
sed by an adult when using the trampoline.
• The trampoline should only be used by one person at a time.
• Maximum user weight has been mentioned in the Technical Specifications.
• It is advisable to be barefoot when using the trampoline. We recommend that
you avoid wearing socks because they might cause you to slip on the mat sur-
face. If you prefer to wear shoes, they should have soft rubber and should not
have heels. Make sure that the shoes have no sharp edges or points that might
damage the mat.
• Caution: Under no circumstances should high-jumping exercises, somersaults
or other acrobatic feats be performed on the trampoline. Never jump off the
trampoline onto the ground!
• Prior to any use of the folding trampoline, check the correct attachment of the
safety padding (6).
• Never place the trampoline on a concrete floor. Place mattresses and blankets
around the trampoline, in order to cushion a possible fall, in case the floor is too
hard.
• Ensure a free space of 2 m around the trampoline's diameter.
• The height of the clearance above the jumping mat has to at least amount to
5 m.
• The trampoline shall constantly be monitored for its suitability for use, for exa-
mple, with regard to the permissible wear and tear of the wearing parts.
• Wearing parts are:
- Spannings and their fixations
- The fastening of the covering on the device
- Anti-skid protection
- Jumping mat
All images are examples of the design.
INSTALLATIoN INSTRuCTIoNS
1. Keep children away from the folding trampoline during the installation process.
2. Do not touch the ends of the frame components with your fingers while unfol-
ding the folding trampoline. The folding trampoline will lock into the unfolded
position. If fingers are caught between the ends of the frame components, pin-
ching may cause serious injuries.
3. If you let go prior to the frame components having locked into place the frame
components will go back into the folded up position while you are unfolding the
folding trampoline.
4. The folding trampoline should always be unfolded or folded by two or more
strong individuals. Prior to installation, cross check all springs. These have been
pre-installed by the factory. If one of the springs is not attached or appears to be
damaged, please perform the steps to secure the spring or exchange it as shown
in figure B:
• Hook the open end of the spring (14) into the hole on the panel.
• Turn the spring (14) in the direction of the trampoline.
• Slide the metal bow on the mat (5) over the spring hooks.
Prior to the performing the installation, make sure that the safety bolts (10) have
been inserted into the frame components correctly. The two overhangs must be
installed within the frame components, as shown in the cross sectional drawing in
the Figure. Failure to do so can cause damage to the safety bolts (10) during instal-
lation step 3.
STEP 1
Place the trampoline on the ground and open the frame components. The trampo-
line should look exactly as shown in Figure 1.
Make sure that the safety bolts (10) have been inserted into the ends of the panels
(1, 2) and secure the wire ring. Both ends of the safety bolts (10) should be placed
at intervals of approx. 30 cm between the frame components (1 + 2 and 3 + 4) and
the wire ring. See Figure 2.
STEP 2
Hold the frame components (3, 4) while pressing down the frame components (1,
2) to unfold the trampoline in a flat position. Frame components (1, 4) and rails (2,
3) should lock into place and be secured by the safety bolts (10) once you have
reached the flat position. See Figure 2.
WARNING: Do not allow your fingers to touch the end of the panels in the hingejoint
areas while you are folding or unfolding the trampoline. If your fingers get caught
between the ends of the panels, pinching can cause serious injuries!
STEP 3
Push the safety padding (6) over the panel frame. Make sure that the holes in the
safety padding (6) are perfectly alinged with the screw connections of the stands.
See Figure 3.
NOTE: Place the opening over the screw connector and repeat this step fort he
screw connection on the opposite end of the trampoline.
STEP 4
Screw the eight legs (7) into the screw connectors on the panel frame. See Figure
4. The safety padding (6) must be securely connected with the frame before the
trampoline may be used. The trampoline must be placed firmly on the ground as
shown in Figure 5.
STEP 5
Place the trampoline into its normal position suitable for its used. Make sure that
the safety padding (6) covers the springs of the folding trampoline. Stand on the
trampoline to make sure that all eight legs are placed straight on the ground. See
Figure 5.
7/16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

65408

Tabla de contenido