Franklin Electric 6" Manual De Instrucciones página 11

Danger to life due to electrocution!
Prior to making the electrical motor connection make sure that there is no more voltage on the entire
plant and that nobody can accidentally switch on the voltage again while the work is being carried
out.
We urgently recommend that you discuss the plant dimensions with the generator manufacturer.
The voltage tolerance –10 % to +6 % -50Hz and +/-10% - 60Hz motors (on the motor terminals) and the
deviation of a motor current from the mean value of all three currents must not be more than 5 %.
Figure 5-10: Fusing and motor protection