Dangerous pressures
During any operation on the system, air can get in and be pressurized. Compressed air can cause the
sudden opening of the cover and cause damage, injuries and even death.
DO NOT RELEASE OR WORK ON THE COVER WHEN THE PUMP IS UNDER PRESSURE.
Use only for fixed facilities of swimming pools and bathing pools. Do not use for seasonal facilities that
can be dismantled (that is, where the water retaining walls are deflated or disassembled in winter).
The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that
they may cause if they have been tampered with, modified and/or run outside the recommended work range
or in contrast with other indications given in this manual.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors
in copying. The Manufacturer reserves the right to make any modifications to products that it may consider necessary
or useful, without affecting their essential characteristics
1 GENERAL
1.1 Description
The system consists of a centrifugal pump and an electronic inverter with advanced control software. It offers a
powerful and flexible system for the automation of the water flow for swimming pools, spas, bathing pools and other
applications.
The pump is particularly efficient. The presence of the inverter allows considerable energy saving, and therefore
economic advantages and protection for the environment; it also allows the complete automation and programmability
of switching on, which can be configured easily and rapidly by means of the wide built-in screen and convenient
keyboard.
ENGLISH
RESPONSIBILITY
Figure1
36