The Operator Panel; Keyboard And Display - DAB E.SWIM Instrucciones De Instalación Y Mantenimiento

The inputs are not opto-isolated.
To connect to the input and output connector, use only the cable kit. The details of the connector and of
the connection are included in the kit.
Attention: keep the cable for the input and output signals well away from the power and alternate supply
lines (230V and similar), so as to limit disturbances and interference that can alter the signals.
When it is not in use, the connector on the pump must be kept accurately closed, with the cap well
tightened. Only in this way is the necessary resistance to water and damp guaranteed.

3 THE OPERATOR PANEL

3.1 Keyboard and Display

1.
2.
8.
9.
11.
12.
Description of the elements:
1. LCD graphic screen
2. (Six) LED warning light indicating the active function; each LED indicates the activation of the key next to it.
3. LED red warning light (
3.
4.
), for alarm indication (fault).
ENGLISH
Figure 6
40
6.
7.
10.
13.
5.