Specifications - Promax TV Explorer HD Manual De Usuario

To enhance its convenience of use, it includes memories to store automatically
the different data acquisitions, i.e.: acquisition name, test points, frequency, channel
plan, etc.,. Moreover, the DATALOGGER function makes it much easier to test systems
in which a large number of measurements have to be made, and enables further
processing of all the information acquired using a computer system. The equipment is
able to generate automatic measurement reports and to update itself through Internet by
means of PkTools provided software.
The TV EXPLORER
corresponding to services from a digital channel. For it, the equipment uses an internal
memory of up to 1 GB.
Also, this meter incorporates a DiSEqC
supply different voltages to the external unit (5 V / 13 V / 15 V / 18 V / 24 V) and includes
an EUROCONNECTOR, or Scart connector, for audio/video input/output.
The TV EXPLORER
to the mains through the supplied external DC power charger.
It incorporates a "USB On-the-go" port, which enables the communication with a
PC and to download dataloggers and channel plans.
This instrument due to its extreme-compact design, technical specifications and
low cost becomes the industry standard for the installer.
1.2

Specifications

CONFIGURATION FOR MEASURING LEVEL AND POWER
TUNING
Tuning modes
Resolution
Automatic search (Explorer)
2 TM
DiSEqC
is a trademark of EUTELSAT.
Page 4
HD / HD in addition, allows to record and to play a TS
LE
HD / HD is powered by rechargeable battery or connected
LE
Digital frequency synthesis. Continuous tuning from
5 to 1000 MHz and from 950 to 2150 MHz.
(Terrestrial and Satellital respectively).
Chanel or frequency (IF or downlink at satellite
band).
Channel plan configurable on demand.
5-1000 MHz:
950-2150 MHz:
Threshold
DVB-S and DVB-S2 selection.
USER'S MANUAL. TV EXPLORER HD / HD
2
command generator and permits to
50 kHz.
< 200 kHz (span FULL-500-200-
100-50-32-16 MHz).
level selectable.
LE
DVB-T/H, DVB-C,
05/2011