Setting The Ts-Asi Input-Output - Promax TV Explorer HD Manual De Usuario

Then you have to install the software NetUpdate3, which is also found in the
memory support delivered with your equipment. It allows connecting the TV EXPLORER
HD / HD and to perform various functions such as create and edit plans, update
LE
firmware, etc..
Once installed all the necessary software on your computer, connect the
TV EXPLORER HD
male) delivered with the equipment. After connecting, it appears an incon at the top of
the measurement screen (Figure 61 .-).
Run the program and make the connection with your equipment using the option
"Detect" on the program to access all the available features.
5.23

Setting the TS-ASI Input-Output

The TS-ASI option is a key feature for a TV analyser. It allows both input and
output transport streams. It automatically detects whether the stream is composed of
188 or 204 bytes. It can transmit in packet mode or burst mode.
To configure the TS-ASI inputs and outputs, access from the TV mode or from the
measurement mode.
From the TV mode, press the measurement configuration
SETUP menu and go to the bottom of the menu until the Enable ASI INTERFACE.
∗
Not available for the Limited Edition(LE) Version.
Page 86
/ HD to the computer by using the CC-041 (mini USB male — USB
LE
Figure 62.-
USER'S MANUAL. TV EXPLORER HD / HD
∗
LE
[17] to access the
05/2011