Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PR 25 rotating laser
It is essential that the operating instructions
are read before the tool is used the first
time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other
persons.
Component parts
PR 25 rotating laser
Laser beam (plane of rotation)
Rotating head
Control panel
Grip
Battery compartment
" thread
5
/
8
Control panel
On/off button
Shock warning deactivation key
Rotation speed control key
Line function key
Direction keys (left/right)
Servo keys (set X/Y inclination/direction)
Auto leveling LED
Shock warning deactivation LED
Battery LED
X-inclination/direction LED
Y-inclination/direction LED
PRA 25 laser receiver
Contents
1. General information
Printed: 07.07.2013 | Doc-Nr: PUB / 5070173 / 000 / 00
1. General information
1.1 Safety notices and their meaning
-WARNING-
The word WARNING is used to draw attention to a poten-
tially dangerous situation which could lead to severe
personal injury of death.
-CAUTION-
Draws attention to a potentially dangerous situation that
could lead to minor personal injury or damage to the
equipment or other property.
-NOTE-
Draws attention to instructions and other useful infor-
mation.
1.2 Pictograms
Warning signs
General warning
Do not stare into the beam.
Laser class 2 in accordance with EN 60825-1:2003
Do not stare into the beam or look directly into the beam
with other optical instruments.
Laser class 3A in a accordance with EN 60825-1:2003
Page
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
13
pages. Keep these pages open when studying the oper-
14
ating instructions.
15
In these operating instructions, the PR 25 rotating laser
15
is referred to as " the tool ".
16
Location of identification data on the tool
17
The type designation and serial number can be found
18
on the type plate on the tool. Make a note of this data in
21
your operating instructions and always refer to it when
21
making an enquiry to your Hilti representative or ser-
22
vice department.
22
23
23
Serial no.:
Symbols
Return waste
Read the operating
material for
instructions before use.
recycling
1/4
s
2
3R
PR 25
en
13
Publicidad
Capítulos
Tabla de contenido
