Initial Settings; Auto Program; Everyday Operation - Oki V40A-PHS Instrucciones De Manejo

Initial Settings

When the TV is turned on for the first time, IDTV is on
first. Because this is the first time that IDTV has been
used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen.
The message "Welcome please select your lan-
guage!" is written in all language options sequen-
tially in the menu on the screen.
By pressing or
you want to set and press "SELECT" button. In the
menu "Set Language" is written next to "OK" item to
indicate that "Press SELECT button to set the high-
lighted language option."
You can get information about the menu usage by
pressing " " button. And press "
to exit the help menu.
After "then, First time Installation Menu will appear on
screen.By pressing
try item you want to set and press "SELECT" button
First time installation
Choose Country
Set country and continue installation
OK
After the First time Installation is set, the following
message appears on the screen.
Do you want to start automatic search?
Yes
• To start automatic search, select "Yes", to cancel
select "No".
• To select an option "Yes or No", highlight the item by
using or buttons and press "SELECT" button.
The IDTV will automatically tune to the transmission
channels according to selected country standards
looking for digital terrestrial TV broadcasts and dis-
playing the names of channels found. This process
will take about five minutes. To cancel searching, you
can press "M" button at any time during the process.
Automatic Search
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
MENU
buttons highlight the language
" button again
or buttons, selected coun-
Czech
No
After Automatic Search process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TV mode:
Country
Language
By pressing " " or " " button, adjust the Country
item and press " " to highlight "Language" item.
Use " " or " " button to set "Language". Use " "
or " " buttons to select "TXT Language" and set it
by using " " or " " buttons. Press "OK" button to
continue:
For more information on this process, see "Install
Menu" section.

Everyday Operation

Pressing the "
ing television programmes will switch the TV set be-
tween the digital terrestrial television broadcasting
and the analogue broadcasting.
Information Banner
• Whenever you change the channel using the "P/CH
+" or "- P/CH" buttons or the number buttons, TV
displays the channel picture along with an informa-
tion banner at the bottom of the screen. This will re-
main on the screen for approximately three seconds.
• The information banner can also be displayed by
pressing the "
the TV. Pressing the "
banner.
4
CH 48
Now:
Next:
The information banner gives a number of facts on
the channel selected and the programme on it:
• The name of the channel is displayed along with its
channel list number and an indication of the strength
of the signal received on this tuning channel.
English - 34 -

Auto Program

TXT Language
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
English
/DTV" button at any time while watch-
" button at any time while watching
" button again removes the
RTL
NEWS
NEWS
Ok
Cancel
09:10
Signal :
04:35-11:00
11:00-17:55