Teletext Language; Install Menu - Oki V40A-PHS Instrucciones De Manejo

PAP Source
Select PAP Source item by using "
Use " " / " " button to set PAP source.
Note: When main picture source is TV, EXT-1, EXT-2,
FAV, PIP Window can only be set to HDMI, YPBPR, PC
source or vice versa.
PAP Programme
Select PAP Programme item by using "
PAP Programme is displayed at the bottom of menu
OSD. Use " " / " " button to set PAP Programme.
You can also use digit buttons on the remote control
to set PAP Programme.
PAP Swap
Select PAP Swap item by using "
" " / " " button. This function enables to swap be-
tween the main and the PAP picture.
Sleep Timer

By pressing / select "Sleep Timer".Press


button to set the Sleep Timer. .
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
Child Lock

By pressing / select Child Lock.

 
Press / button to set the Child Lock on or off.When
on is selected, the TV can only be controlled by the
remote control handset. In this case the control panel
buttons will not work. Hence, if one of these buttons
is pressed, "Child Lock On" will be displayed on the
screen when the Menu screen is not visible.
Language

By pressing / button, select Language.Use


/ button to select the language.
EXT2 Out

By pressing / select EXT2 Output.Use

button, to set Ext-2 Out to TV/DTV, EXT1, FAV, Audio
YPbPr or Audio PC.
Note:
• When TV Source is set to HDMI, HDMI Audio set-
ting will be available among EXT-2 Out options.
• If currently watched source is analogue TV, a con-
nected device displays analogue TV source as well.
If this source is set to digital mode, connected de-
vice displays digital source. In order to avail this
function, EXT-2 Output should be set to TV/DTV.
PC Audio In

By pressing / select Pc Audio In.By pressing

" " / " " button, you can change the PC Audio In to
TV/DTV, EXT-1, EXT-2, YPbPr Audio, PC Audio or
FAV.

/ " button.


/ " button.


/ " button. Use


/

 
/
English - 46 -
Blue Background
You can set the TV to automatically change to a blue
screen if the signal is weak or absent, or when there
is no input from an external device.
The Blue Background feature can be turned on or off
by pressing " " / " " button.
Menu Background

By pressing " " / "

ground. Transparency level is adjusted by pressing
" " / " " button.
Menu Timeout

By pressing " " / "

Press " / " " button to change menu timeout to 15
sec, 30 sec or 60 sec.

Teletext Language


By pressing " " / " " button, select Teletext Language.

Press " " / " " button to change Teletext Language
to West, East, Turk/Gre,Cyrillic, or Arabic.
Default Zoom
Default zoom is a feature that provides the zoom mode
of the TV set to be switched to the selected default
zoom mode (Panoramic, 4:3 ,14:9 zoom,16:9) in case
no WSS or 4:3 signal by end-user.

By pressing " " / "

You can set Default Zoom to Panoramic, 4:3, 14:9
Zoom or 16:9 by pressing " " / " " button.

Install Menu

INSTALL
Program Table
Program
Band
Channel
Colour System
Program Table

By pressing /

Press " " to display Program Table.
" button, select Menu Back-
" button, select Menu Timeout.
" button, select Default Zoom.
button, select Program Table.