Unpacking And Connecting; Unpacking; Assembly - Royal Dirt Devil Vaporflex Manual De Instrucciones

02Centrixx_Retro_gb.book Seite 25 Freitag, 16. Mai 2008 12:40 12

2 Unpacking and connecting

2 Unpacking and connecting

2.1 Unpacking

2.2 Assembly

3
2
2
2
2
1
Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding the
scope of delivery,
Vaporflex".
ATTENTION:
Always transport/send the appliance in its original
packaging so that it does not become damaged. Keep
the packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then
contact your dealer immediately.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket and the accessory parts have cooled
down.
1
1. Insert the handle (Fig. 2/1) and the extension tubes
(Fig. 2/2) into each other. The locking catch clicks
audibly into place.
Fig. 2
NOTE:
You can take the tubes apart. To do this, press the
release button (Fig. 2/3) and pull the tubes apart.
2. Insert the jointed connection (Fig. 3/1), as shown, into
1
the floor nozzle (Fig. 3/2).
3. Turn it 180° to lock it. It is now securely connected to the
floor nozzle.
NOTE:
To loosen it, turn the jointed connection again by 180°.
Fig. 3
Page 20, "An overview of your
25