02Centrixx_Retro_gb.book Seite 32 Freitag, 16. Mai 2008 12:40 12
4 Textile Maintenance Set
4.4 Operating
4.5 Technical data
32
1. Get the Vaporflex ready for steam,
"Cleaning".
2. Set the Vaporflex to steam level "1".
NOTE:
Drops can form at higher steam levels which can be
detrimental to the work result.
3. Using a coat hanger (not supplied), hang the piece of
clothing that you would like to treat onto the clothes
hook.
4. Hold the textile maintenance nozzle away from the body
and press the steam switch.
5. Wait until sufficient steam is coming out of the textile
maintenance nozzle.
Then guide the textile maintenance nozzle to the textile
Fig. 18
and steam it with slow up and down movements
(Fig. 18).
Use the cotton cover (Fig. 16/8) if necessary to remove
hair and fluff better from the piece of textile.
After use, switch the Vaporflex off
and retracting the power cable" and clear away the
accessories so there is no risk of tripping over anything.
Type of appliance :
Working height
Chapter 3.1
Page 30, "Switching off
Textile Maintenance Set
:
approx. 1.60 m