Kreg Jig HD Guia De Inicio Rapido página 7

Repair Applications
The removable Stop Block allows you to use your Kreg Jig
reinforce existing joints.
For repair applications, remove the
Stop Block from the Drill Guide,
and clamp the Guide directly to
the workpiece. The position of the
Depth Collar on the drill bit does
not change. In situations where
using a clamp is not possible, you
can fasten the Drill Guide directly
to the workpiece by driving a
screw through the hole in the center
of the guide, as shown.
800-447-8638
HD Screws are designed to match the ruggedness of "2X" construction. The robust
HD to repair or
®
#14 screws feature the same case-hardened body and Protec-Kote
coating as our deck screws
#3 Square Drive
For reduced cam-out.
Kreg Jig
Three Protec-Kote™ anti-corrosion layers
Protects against rusting in a wide variety
of outdoor applications. Perfect for ACQ
treated lumber.
Self-Tapping Tip
Faster and easier driving.
HD Screw Features
®
™
anti-corrosion
Extra-large fl at-bottom washer head
Firmly seats on the pocket-hole
shoulder to resist pull-through.
Case-Hardened Steel
No bending. No breaking.
www.kregtool.com