Basic Operation - Sharp ECO INVERTER AY-XP9RMR Manual De Instrucciones

BASIC OPERATION

1
Press the ON/OFF button to start operation.
• " " will be displayed on the remote control.
• The green OPERATION lamp (
TO TURN OFF
Press the ON/OFF button again.
• " " will disappear on the remote control.
• The green OPERATION lamp (
2
Press the MODE button to select the
operation mode.
AUTO
3
Press
temperature.
1
(AUTO mode)
2
The temperature indicator will not display and the
temperature can not be adjusted.
3
(COOL/DRY/HEAT mode)
The temperature setting range: 16-30 °C.
4
(FAN mode)
The temperature will not change regardless of the
temperature indicator on the remote control.
4
Press the FAN button to set the desired fan
speed.
In the DRY mode, the fan speed is preset to
"SOFT ( )" and cannot be changed.
NOTE:
AUTO MODE
In the AUTO mode, the temperature settings and
modes are automatically selected according to the
room temperature.
GB-5
COOL DRY FAN HEAT
or button to set the desired
SOFT LOW HIGH
) will light up.
) will turn off.