Functional Description; Name Of Parts; Specifications - Hitachi Koki WR 22SA Manual De Instrucciones E Instrucciones De Seguridad

FUNCTIONAL DESCRIPTION

NOTE:
The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.

NAME OF PARTS

Anvil

SPECIFICATIONS

Motor
Power Source
Current
No-Load Speed
Capacities
Tightening Torque
Square Drive
Weight
Hammer
Case
Air Vents
Bumper
Switch
Handle Cover
Fig. 1
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
7.5 A
1,800/min
5/8" – 7/8"
9/16" – 15/16"
Maximum 450 ft-lbs (62.2 kg-m)
3/4" (19 mm)
10.6 lbs (4.8 kg)
Housing
Nameplate
Brush Cap
(inside the tail cover)
Tail Cover
(M16 – M22) (High tension bolt)
(M14 – M24) (Ordinary bolt)
English
9