Maintenance Schedule; Maintenance - Honda EU 10i Manual De Explicaciones

The purpose of the maintenance and adjustment schedule is to keep
the generator in the best operating condition.
Inspect or service as scheduled in the table below.
Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
Carbon monoxide poisoning from engine exhaust. Be sure there is
adequate ventilation whenever you operate the engine.
Burns from hot parts. Let the engine and exhaust system cool
before touching.
Injury from moving parts. Do not run the engine unless instructed
to do so.
The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler
while it is hot. Let the engine cool before maintenance.
Use genuine Honda parts or their equivalent. The use of replacement
parts which are not of equivalent quality may damage the generator.

Maintenance Schedule

REGULAR SERVICE PERIOD (3)
Item
Performed at every indicated
month or operating hour interval,
whichever comes first.
Engine oil
Air cleaner
Spark plug
Spark arrester
Valve Clearance
Combustion
chamber
Fuel tank & filter
Fuel line
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by your Honda servicing dealer, unless you have
the proper tools and are mechanically proficient. Refer to the Honda shop manual
for service procedures.
(3) For commercial use, log hours of operation to determine proper maintenance
intervals.
Each use
Check level
Change
Check
Clean
Check-adjust
Replace
Clean
Check-adjust
Clean
Clean
Check
8.

MAINTENANCE

First Every
month 3 months
or or
10 hrs. 50 hrs.
(1)
After every 300 hrs (2)
Every year (2)
Every 2 years (Replace if necessary) (2)
Every Every
6 months 2 years
or or
100 hrs. 300 hrs.
(2)
39